In stock - we always supply only new products in their original packaging. Please contact us with any questions.
Price:
Product Code:
CNSZ-810
Product Overview
It can be used extensively for scientific research, biological and medical field.
Ergonomic design ensures comfortable and accurate operation in a natural posture.
Unrivated optical performance, ergonomic design and a variety if accessories to meet your requirements.
The CNSZ-810 features a large 10× zoom ratio, extending from 0.8× to 8×. This gives you total magnification from 4× to 320×, depending on the combination of eyepiece and objective used. In addition to the standard type, you have the option of using a tilting binocular eyepiece tube to observe at an optimum eyepoint.
Expanded accessory lineup for greater flexibility in various applications such as:
Epi-Fluorescence attachement
Dark field attachement
Photography attachement
Capability and Coaxial Coarse/ Fine Focusing Unit
... and much more
Images appear undistorted and natural-looking
Producing images that cause less strain on your eyes was one goal of the ergonomic design. The problems usually asssociated with stereoscopic microscops, namely chromatic aberration and distortion in the lens that cause surface irregularities in the image, have been resolved succesfully. With CNSZ-810 you can view stereoscopic images that appear undistorted in all their brilliant, tru-to-life colors.
Standard outfit
Optical System:
Parallel Optical Zoom System
Drawing Tube:
20° Inclined Binocular Head
Zoom ratio:
1:10
Zoom Objective:
0.8× ≈ 8×
Objective:
Plan Achromatic Objective 1×
Eyepiece:
10× ⁄ Ø Φ22
Working Distance:
78mm
Focusing Range:
105mm
Illuminator:
Transmission / Reflection LED illumination, Brightness Adjustible
Plan Achromatic Objective 0.5× Plan Achromatic Objective 2×
Eyepiece 16× & 20×
Dark Field & Epi-Fluorescent Attachement
Coaxial Illumination
Photography & Video Attachement
Simple Polarization Set
Mechanical & Temperatire Controlled Stage
Coaxial Coarse⁄Fine Focusing Unit
Universal Stage Stand, D Stand
Microscope
Specimens
Comments & Clients Review
Troubleshooting
Under certain conditions, performance of this unit may be adversely affected by factors other than defects. If a problem occurs, please review the following list and take remedial action as needed. If you cannot solve the problem after checking the entire list, please contact your local franchiser for assistance.
PROBLEM
CAUSE
SOLUTION
1．
Incomplete binocular vision.
Interpupillary distance is not correctly adjusted.
Adjust it correctly
Diopter adjustment is incomplete.
Complete diopter adjustment
2．
Dirt is visible in field of view
Dirt on specimen
Clean specimen
Dirt on eyepiece
Clean eyepiece
3．
The visibility of the image is poor.
Dust on objective front lens.
Clean lens surface
4.
Specimen image blurs when zoom magnification is changed.
Diopter ring is not correctly adjusted.
Adjust it correctly.
Not in complete focus on specimen.
Focus specimen correctly at a high magnification.
5．
Coarse focus adjustment knobs rotate with too much resistance.
Tension adjustment ring is too tight.
Loosen it properly.
6．
Zoom microscope body drops or specimen goes out of focus during observation.
Copyright (c) 2009 CanScope - Canadian, Toronto based microscopes distributor. Repair, Service, Sales and Custom solutions for microscope based systems.
